Titan Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R20/21/22:Gesundheitssch?dlich beim Einatmen,Verschlucken und Berührung mit der Haut.
R11:Leichtentzündlich.
R17:Selbstentzündlich an der Luft. Spontaneously flammable in air.
R36/38:Reizt die Augen und die Haut.
S-S?tze Betriebsanweisung:
S16:Von Zündquellen fernhalten - Nicht rauchen.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S33:Ma?nahmen gegen elektrostatische Aufladungen treffen.
S27:Beschmutzte, getr?nkte Kleidung sofort ausziehen.
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S6:Unter . . . aufbewahren (inertes Gas vom Hersteller anzugeben).
Aussehen Eigenschaften
SF: Ti
MG: 47.90
EINECS: 231-142-3
Gefahren für Mensch und Umwelt
Bezeichnung der Gefahren: Reagiert mit Wasser unter Bildung hochentzündlicher Gase. Selbstentzündlich an Luft. Zu vermeidende Bedingungen: Starke Erhitzung. Zu vermeidende Stoffe: Metalloxide, Halogene, Oxidationsmittel (u.a. Salze von Halogensauerstoffsäuren, Nitrate, KMnO4, salpetrige Säure),Metallsalze, Kohlendioxid, Luft, Halogenoxide, Sauerstoff, Nichtmetalle, Wasserstoff/Luft. Gefährliche Zersetzungsprodukte: keine Angaben vorhanden.
Reizwirkung nach Einatmen, Haut- und Augenkontakt.
Im allgemeinen nicht wassergefährdend (WGK 0).
Schutzma?nahmen und Verhaltensregeln
Dicht verschlossen, entfernt von Zünd- und Wärmequellen lagern.
Erforderlich beim Auftreten von Stäuben.
Schutzbrille mit Seitenschutz und oberer Augenraumabdeckung
Erforderlich als kurzzeitiger Staubschutz
Verhalten im Gefahrfall
Reinigungsverfahren: Trocken aufnehmen. Der Entsorgung zuführen. Nachreinigen. Staubentwicklung vermeiden.
Geeignete Löschmittel: Metallbrandpulver. Mit trockenem Sand oder Zement abdecken. Ungeeignete Löschmittel: Kohlendioxid, Wasser, Schaum.
Brennbar. Gefahr der Staubexplosion.
Erste Hilfe
Nach Hautkontakt: Nach Berührung sofort mit Seife und viel Wasser abwaschen. Abtupfen mit Polxethylenglycol 400.
Nach Augenkontakt: Nach Berührung mit den Augen mit viel Wasser während mindestens 15 Minuten bei geöffnetem Lidspalt ausspülen. Sofort Augenarzt hinzuziehen.
Nach Einatmen: Person sofort an die frische Luft bringen.
Nach Verschlucken: Nach Verschlucken (großer Mengen) Bei Unwohlsein Arzt konsultieren.
Nach Kleidungskontakt: Kontaminierte Kleidung entfernen.
Ersthelfer: siehe gesonderten Anschlag
Sachgerechte Entsorgung
Falls Recycling nicht möglich, als Sonderabfall entsorgen, zuständige Stellen: Hubland-Herr Riepl:8884711, Klinikum-Herr Uhl:2015557.
Beschreibung
Titanium was discovered by the Reverend William Gregor in
1791, and is named after the ‘Titans’ of Greek mythology. The
metal was not isolated in a pure state until 1910, and useful
quantities were not available for industrial applications until
1946, when an economical purification process was developed.
Chemische Eigenschaften
Titanium is a silvery metal or dry, dark-gray amorphous, lustrous powder.
Physikalische Eigenschaften
Positioned at the top of group 4 (IVB), titanium heads up a group of metals sometimesreferred to as the “titanium group.” Members of this group have some similar properties.Titanium’s density is 4.5 g/cm
3, which makes it heavier than aluminum but not as heavy asiron. Its melting point is high at 1,660°C, and its boiling point is even higher at 3287°C.Titanium metal is harder than steel but much lighter and does not corrode in seawater,which makes it an excellent alloy metal for use in most environmental conditions. It is alsoparamagnetic, which means that it is not responsive to magnetic fields. It is not a very goodconductor of heat or electricity.
Isotopes
There are 23 known isotopes of titanium. All but five are radioactive, rangingfrom Ti-38 to Ti-61, and have half-lives varying from a few nanoseconds to a few hours.The percentages of the five stable isotopes found in nature are as follows:
46Ti = 8.25%,
47Ti = 7.44%,
48Ti = 73.72%,
49Ti = 5.41%, and
50Ti = 5.18%.
Origin of Name
It was named after “Titans,” meaning the first sons of the Earth as
stated in Greek mythology.
Occurrence
Titanium is the ninth most abundant element found in the Earth’s crust, but not in pureform. It is found in two minerals: rutile, which is titanium dioxide (TiO
2), and ilmenite(FeTiO
3). It is also found in some iron ores and in the slag resulting from the productionof iron. The mineral rutile is the major source of titanium production in the United States.Although titanium is widely spread over the crust of the Earth, high concentrations of itsminerals are scarce. In the past it was separated from it ores by an expensive process ofchemical reduction that actually limited the amount of metal produced. A two-step processinvolves heating rutile with carbon and chlorine to produce titanium tetrachloride—TiO
2+ C + 2Cl
2 → TiCl
4 + CO
2—which is followed by heating the titanium tetrachloridewith magnesium in an inert atmosphere: TiCl
4 + 2Mg → Ti + 2 MgCl
2. As recently as theyear 2000, a method of electrolysis was developed using titanium tetrachloride in a bath ofrare-earth salts. This process can be used on a commercial scale that makes the productionof titanium much less expensive. Titanium was, and still is, a difficult element to extractfrom its ore.Titanium is found throughout the universe and in the stars, the sun, the moon, and themeteorites that land on Earth.
History
Titanium was discovered by William Gregor in 1791.It is an amateur mineralogist, discoveredan odd black sandy substance in his neighborhood. It had been analyzing magnetic black sand in his free time when he became aware that he'd happened upon a new type of metal. Separately, a German chemist discovered the material a few years later. For its strength, he decided to call it titanium after the Titans of Greek mythology. It wasn't until 1797 that the chemist realized his discovery was none other than Gregor's gregorite. It was another century before titanium was successfully isolated and we began incorporating it into the variety of products you can find it in today.The metal found its place in the periodic table as element 22, and it's useful in a wide range of industries due to its high strength, resistance to rust and corrosion, and compatibility with medical applications for the human body.
Charakteristisch
As the first element in group 4, titanium has characteristics similar to those of the othermembers of this group: Zr, Hf, and Rf. Titanium is a shiny, gray, malleable, and ductile metalcapable of being worked into various forms and drawn into wires.
Verwenden
As alloy with copper and iron in titanium bronze; as addition to steel to impart great tensile strength; to aluminum to impart resistance to attack by salt solutions and by organic acids; to remove traces of oxygen and nitrogen from incandescent lamps. Surgical aid (fracture fixation).
Vorbereitung Methode
Titanium is the ninth most abundant element and accounts for about 0.63% of the Earth’s crust. Analyses of rock samples from the moon indicate that titanium is far more abundant there; some lunar rocks consist of 12% titanium by weight. World production of titanium sponge metal was estimated at 69,000 metric tons in 1991. The most important titaniumbearing minerals are ilmenite, rutile, and leucoxene. Ilmenite (FeTiO
3) is found in beach sands (Australia, India, and Florida) and in rock deposits associated with iron (Norway and Finland). Ilmenite accounts for about 91%of the world’s consumption of titanium minerals and world resources of anatase, ilmenite, and rutile total more than 2 billion tons. Rutile (a form ofTiO
2) is less abundant; its chief source is certain Australian beach sands. Two other less prominent forms of TiO2 exist, anatase and brookite. The ores vary around the world in TiO
2 content from 39% to 96%. Anatase is used as a food color.
Definition
A silvery
transition metal that occurs in various ores
as titanium(IV) oxide and also in combination
with iron and oxygen. It is extracted
by conversion of titanium(IV) oxide to the
chloride, which is reduced to the metal by
heating with sodium. Titanium is reactive
at high temperatures. It is used in the aerospace
industry as it is strong, resistant to
corrosion, and has a low density. It forms
compounds with oxidation states +4, +3,
and +2, the +4 state being the most stable.
Symbol: Ti; m.p. 1660°C; b.p. 3287°C;
r.d. 4.54 (20°C); p.n. 22; r.a.m. 47.867.
Allgemeine Beschreibung
TITANIUM is a gray lustrous powder. TITANIUM can be easily ignited and burns with an intense flame. The very finely powdered material may be ignited by sparks.
Air & Water Reaktionen
Highly flammable. Pyrophoric in dust form [Bretherick 1979, p. 104]. Titanium is water-reactive at 700C, releasing hydrogen, which may cause an explosion [Subref: Mellor, 1941, vol. 7, 19].
Reaktivit?t anzeigen
TITANIUM reacts violently with cupric oxide and lead oxide when heated. When titanium is heated with potassium chlorate, potassium nitrate, or potassium permanganate, an explosion occurs [Mellor 7:20. 1946-47]. The residue from the reaction of titanium with red fuming nitric acid exploded violently when the flask was touched [Allison 1969]. Liquid oxygen gives a detonable mixture when combined with powdered titanium, [Kirchenbaum 1956].
Hazard
Almost all of titanium’s compounds, as well as the pure metal when in powder form, areextremely flammable and explosive. Titanium metal will ignite in air at 1200°C and willburn in an atmosphere of nitrogen. Titanium fires cannot be extinguished by using water orcarbon dioxide extinguishers. Sand, dirt, or special foams must be used to extinguish burningtitanium.
Health Hazard
Inhalation of metal powder may cause coughing,irritation of the respiratory tract, anddyspnea. Intramuscular administration of titaniumin rats caused tumors in blood. Animalcarcinogenicity is not fully established.Human carcinogenicity is not known.
Brandgefahr
Flammable/combustible material. May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard. Containers may explode when heated.
Sicherheitsprofil
Questionable
carcinogen with experimental tumorigenic
data. Experimental reproductive effects.
The dust may ignite spontaneously in air.
Flammable when exposed to heat or flame
or by chemical reaction. Titanium can burn
in an atmosphere of carbon dioxide,
nitrogen, or air. Also reacts violently with
BrF3, CuO, PbOx (Ni + KClO3), metaloxy
salts, halocarbons, halogens, CO2, metal
carbonates, Al, water, AgF, O2 , nitryl
fluoride, HNO3,O2, KClO3, KNO3 ,
KMnO4, steam @ 704°, trichloroethylene,
trichlorotrifluoroethane. Ordinary
extinguishers are often ineffective against
titanium fires. Such fires require special
extinguishers designed for metal fires. In
airtight enclosures, titanium fires can be
controlled by the use of argon or helium.
Titanium, in the absence of moisture, burns
slowly, but evolves much heat. The
application of water to burning titanium can
cause an explosion. Finely dwided titanium
dust and powders, like most metal powders,
are potential explosion hazards when
exposed to sparks, open flame, or high-heat
sources. See also TITANIUM
COMPOUNDS, POWDERED METALS,
and MAGNESIUM.
m?gliche Exposition
Titanium metal, because of its low weight, high strength, and heat resistance, is used in the aerospace and aircraft industry as tubing, fittings, fire walls; cowlings, skin sections; jet compressors; and it is also used in surgical appliances. It is used, too, as controlwire casings in nuclear reactors, as a protective coating for mixers in the pulp-paper industry and in other situations in which protection against chlorides or acids is required; in vacuum lamp bulbs and X-ray tubes; as an addition to carbon and tungsten in electrodes and lamp filaments; and to the powder in the pyrotechnics industry. It forms alloys with iron, aluminum, tin, and vanadium, of which ferrotitanium is especially important in the steel industry. Other titanium compounds are utilized in smoke screens, as mordants in dyeing; in the manufacture of cemented metal carbides; as thermal insulators; and in heat resistant surface coatings in paints and plastics.
Environmental Fate
Titanium is poorly absorbed by plants and animals and is
retained to only a certain extent. High levels of titanium in food
products can be detects, however, when soil is contaminated by
fly-ash fallout or titanium-containing sewage residues and
when titanium dioxide is used as a food whitener. Food, which
is considered to be the most important source of exposure to
titanium, contributes >99% of the daily intake of the element.
There are no relevant tolerable intakes for titanium against
which to compare estimated dietary intake. Typical diets may
contain approximately 0.3–0.5 mg titanium.
Titanium content of soil generally ranges from 0.3 to 6%,
high levels of which are found in the vicinity of power plants
because of combustion of coal.
Titanium concentrations in the atmosphere are comparatively
low. Annual average concentrations in urban air are
mostly <0.1 mgm
-3 and they are lower still in rural air. Air
concentrations up to 0.5 mgm
-3 have been reported in urban
and industrialized areas.
Versand/Shipping
UN2546 Titanium powder, dry, Hazard Class: 4.2; Labels: 4.2-Spontaneously combustible material.
Inkompatibilit?ten
Powder and dust may ignite spontaneously in air. Violent reactions occur on contact with water, steam, halocarbons, halogens, and aluminum. The dry powder is a strong reducing agent; Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause firesor explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides.
Titan Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
