Titanoxidsulfat Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R35:Verursacht schwere Ver?tzungen.
S-S?tze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
Chemische Eigenschaften
White, cake-like solid. Highly acidic,
similar to 50% sulfuric acid, typical composition
20% TiO2, 50% sulfuric acid, 30% water,
hygroscopic. Soluble in water; solutions
hydrolyze readily unless protected from heat and
dilution.
Verwenden
In tanning; in production of pigment grade and of anatase-structured titanium dioxide.
Vorbereitung Methode
Pure, multiple-distilled TiCl4 is added in drops (vigorous stirring) to the stoichiometric quantity of 50% H2SO4. The precipitate formed after each addition should dissolve completely before the next portion of TiCl4 is added. After adding about 3/4 of the TiCl4, the liquid turns into a viscous, yellowish solution. It is diluted with 1/5 its volume of water, and the dropwise addition of TiCl4 is completed. The resultant solution, which is still highly concentrated in HCl, is evaporated to dryness in a water bath. The residue is pulverized, dried, and freed of HCl by heating it for several days at 80-100°C in a drying pistol at a pressure of a few mm. The sulfate obtained in this manner (TiO2: SO3 = 1:1.07) is colourless and free of HCl. It is hygroscopic and soluble in water, yielding a clear solution.
Allgemeine Beschreibung
A colorless or violet colored liquid. Dilution releases heat and may cause precipitation of solid titanium sulfate. Corrosive to metals and tissue. TITANIUM OXYSULFATE is used to make pigments and in dyeing.
Air & Water Reaktionen
Can generate heat on dilution with water.
Reaktivit?t anzeigen
A highly acidic liquid.
Hazard
Irritant to skin and tissue.
Health Hazard
TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
Brandgefahr
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.
Sicherheitsprofil
A corrosive irritant to
skin, eyes, and mucous membranes. When
heated to decomposition it emits toxic
fumes of SOx. See also TITANIUM
COMPOUNDS and SULFATES.
l?uterung methode
Dissolve it in water, filter and crystallise it three times from boiling 45% H2SO4, washing with EtOH to remove excess acid, then with Et2O. Dry it in air for several hours, then in an oven at 105-110o. [Hixson & Fredrickson Ind Eng Chem 37 678 1945.]
Structure and conformation
The structure of titanium(IV) oxysulfate consists of dense polymeric network with tetrahedral sulfur and octahedral titanium centers. The six ligands attached to titanium are derived from four different sulfate moieties and a bridging oxide.
Titanoxidsulfat Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
