BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.
P302+P352
BEI BERüHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckm??ig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.
P304+P340
BEI EINATMEN: Die Person an die frische Luft bringen und für ungehinderte Atmung sorgen.
P305+P351+P338
BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach M?glichkeit entfernen. Weiter spülen.
S22:Staub nicht einatmen. S24/25:Berührung mit den Augen und der Haut vermeiden.
Chemische Eigenschaften
white crystalline powder, crystals and/or chunks
Verwenden
1,1,1-Tris(hydroxymethyl)ethane is an intermediate in the production of alkyd and polyester resins, powder coating resins, synthetic lubricants based on polyol esters, stabilizers for plastics, plasticizers, and pigment coatings. It is used in some phase change materials.
Vorbereitung Methode
1,1,1-Tris(hydroxymethyl)ethane (2-hydroxymethyl-2-methyl-1,3-propanediol) is made by aldol condensation of propionaldehyde with formaldehyde, followed by reaction of the intermediate 2,2-bis(hydroxymethyl)propanal with excess formaldehyde in the presence of sodium hydroxide or lime as basic component. The resulting aqueous solution is freed from excess formaldehyde by distillation under pressure and further concentrated. The formate byproduct can be separated by extracting the trimethylolethane from the residue with organic solvents such as 2-propanol or by almost complete removal of the water and dissolving the trimethylolethane in acetone or methanol.
l?uterung methode
Dissolve it in hot tetrahydrofuran, filter and precipitate it with hexane. It has also been crystallised from acetone/water (1:1). Dry it in a vacuum. [Beilstein 1 H 520, 1 IV 2780.]
Ethylidintrimethanol Upstream-Materialien And Downstream Produkte