Product Description                                                      

Introduction 

External light absorber UV-360, also known as 2, 2'-methylene-bis[4-teroctyl-6-(2H-benzotriazolyl-2)|pheno l, is a benzoic acid with excellent performance.Triazole UV absorber, Ultraviolet absorbers are a type of organic compoundsthat can selectively and strongly absorb UV rays from sunlight that are harmfulto polymers and are highly photostable. Since the Chemicalbook in the 1970s,benzotriazole has been marketed by Ciba-Geigy of Switzerland, lt is widely usedin various synthetic materials and products due to its oil resistance,discoloration resistance, low volatility, and good compatibility with polymers. ltis the most commonly used and most effective UV absorber, especially inautomotive coatings. As the application fields of engineering and modifiedplastics continue to expand, there is demand and hope for UV absorbers

Function

UV absorption capacity: UV-360 can absorb UV rays in the range of 300-400nm, effectively protecting materials from UV damage.

Extremely low volatility: Good compatibility with resin, even at high addition levels, it is not easy to precipitate from the material, suitable for applications with high requirements for processing, thermal stability, and weather resistance.

Widely applicable: Suitable for various resins and materials, including acrylic resin, polycarbonate (PC), polyamide (PA), polyoxymethylene (POM), polyethylene terephthalate, polyphenylene ether, polyphenylene sulfide, styrene based materials, and other high-performance materials.

Compatibility: Can be used together with other light stabilizers or antioxidants to enhance the weather resistance and stability of the material.

Application

UV-360 is a highly efficient UV absorber that can absorb 300-400nm UV rays and is widely compatible with a variety of resins. It has very low volatility and can be used together with other light stabilizers or antioxidants. It is suitable for acrylates, polyesters, polycarbonates, polyformaldehyde, polyamides, polyolefins, styrenic polymers, and elastomers. , adhesives, etc. can be extruded in the form of powder, solution or melt, which can prevent crystal seepage and sublimation. It can also be used for casting, thin-layer construction of fiber, paper and wallpaper, etc.