DS88 Car seal adhesive special glue 1、product name：DS88 Car seal adhesive special glue 2、picture： 3, product features introduced: ding sheng 88 series refrigerated car special sealant, is to use a new polymer formula, one-component, low odor, construction is convenient, the green environmental protection.Suitable for use refrigerated car all kinds of material, repair, adhesive, sealing interface switching.Especially for glass fiber reinforced plastic cold storage compartment seal effect is better. 4, product categories: one-component polyurethane glue, room temperature curing. 6, size: two packaging 20 / box, flexible packaging, 600 ml/teams, rigid package, 310 ml/teams.The default color is white.Other color can be according to the customer designated RAL color card for production. 7, the main advantages: 1) high modulus, high elasticity, high strength, strong cohesion, no crack;2) one-component moisture curing, good thixotropy, facade coating does not flow, construction is convenient;3) the old and new rubber compatibility good, repair convenience;4) without solvent, non-toxic tasteless, after curing green;5) water resistant, oil resistant, resistant to acid and alkali, not mildew;6) puncture resistance, ageing resistance, weather resistance, fatigue;7) and a variety of base material with good adhesion;8) for base material corrosion, the surface can be polished, painted; With the traditional silicone rubber and refrigerated car special sealant contrast table" NO. test items Traditional silicone rubber DS88 1 intensity not high high 2 flexibility general Very good 3 Environmental protection easy to pollution no pollution 4 adhesion of the metal not strong any material high bonding strength 5 repair Repair hard Repair easy 6 Resistance to damage Damage easy Damage no easy 7 Grind Unable to burnish Easy to burnish 8 appearance No spray paint spray paint easy 8, transportation, storage and shelf life: Low transport, moistureproof, prevent the rain, prevent bask in, anti high temperature, away from heat source, handle with care, prohibited squeeze the collision; Low storage: sealed and stored in low temperature, dry place, suggested that stored at the temperature 5 ~ 25 ℃, 50% RH or less humidity environment, prohibit stored in 30 ℃ temperature is higher than or greater than 80% RH environment humidity; Low shelf life: in the original packaging container, shelf life not less than nine months, nine months later, after inspection qualified can still use. 9, the technical parameters: item Performance indicators item Performance indicators item Performance indicators Outside white paste Volatilization ≤5% Shear strength ≥2.0MPa Density 1.30±0.05 g/cm3 hardness 55±5 Ao Construction temperature +5~+35℃ Table dry time ≤60 min tensile strength ≥5.0MPa Shelf life 9個(gè)月 curing speed 3~5mm/d Elongation at break ≥400 % 10, the main scope of application: Steel and steel between the adhesive sealing; Steel and FRP sheets of adhesive seal; High-grade furniture, all kinds of floor installation sealing box bond; Metal, ceramic, stone, glass, wood and other materials from the glue and glue sealing, or suitable for high strength requirement of seams, sealing, bonding, etc. 11, construction technology and use advice "According to different application areas refer to relevant construction technology. Low to choose the products and glue, activator and other supporting products to treat adhesive backing adhesive must first before bonding experiment was carried out, to ensure that they have good compatibility, in use at the same time should ensure that the main glue, glue, activator is a warranty period of products. Please in strict accordance with the construction process, any violation of construction technology of operation may cause adhesive failure; This article completely cured non-toxic, but in front of the curing should avoid contact with eyes, skin, if contact with eyes, skin, first wash with soap and water or alcohol, and then rinse with water, if the situation is serious, shall be immediately call doctor.