堿式氯化鋁 技術指標 堿式氯化鋁 國標參數 15038181629

[中文名稱]堿式氯化鋁
[英文名稱]縮寫B(tài)AC
[分子式] [Al2(OH)nCI6-n]是一種無機高分子的高價聚合電解質混凝劑，可視為介于三氯化鋁和氫氧化鋁之間的一種中間水解產物產品為黑色。
[技術標準] 質量符合國家GB15892-2003標準
堿式氯化鋁是60年代后期，正式投入工業化生產和應用的一種新型無機高分子混凝劑。是利用工業鋁灰和活性鋁礬土為原料經過精制加工聚合而成，此產品活性較高對于工業污水，造紙水、印染水具有較好的凈化效果。 具有投加量少。凈化效率高。成本低等一系列優點。
堿式氯化鋁
分標準堿式氯化鋁（有兩種原料生產），復合型堿式氯化鋁（有四種原料生產，主要用于酸性水、發酵水、脫色效果好）

堿式氯化鋁
分標準堿式氯化鋁（有兩種原料生產），復合型堿式氯化鋁（有四種原料生產，主要用于酸性水、發酵水、脫色效果好）
使用時應先根據水質進行小試，選出凈水效果好，投放量小的點。溶液應隨配隨用，非飲用水應根據實際情況選定用量。
⒉使用固體時，先加水溶解陪配成10-25%的溶液，而后水稀釋至所需濃度，在溶解時先加水慢慢投料，并不斷進行攪拌。
⒊不同廠家或不同牌號的水處理藥劑不能混合，并且不得與其他化學藥品混存。
⒋原液和稀釋液稍有腐蝕性，但低于其他各種無機絮凝劑。
⒌產品有效儲存期：液體半年，固體兩年。固體產品潮后仍然可使用。
⒍本產品經合理投加，凈化后水質符合生活飲用水衛生標準。

[name] Chinese polyaluminum chloride
[English name] abbreviation BAC
Is a kind of inorganic polymer coagulant polymer electrolyte [Formula] [Al2 (OH) nCI6-n] can be regarded as between chloride and aluminum hydroxide between a hydrolysis intermediate product product is black.
[technical standards] quality in line with national GB15892-2003 standards
Basic aluminum chloride is in the late 60, officially put into a new type of inorganic polymer coagulant for industrial production and application. Is the use of industrial aluminum ash and activated bauxite as raw material, through the refining process of polymerization and, this product with high activity for industrial wastewater, papermaking, printing and dyeing water water has better purification effect. With a small amount of investment. High purification efficiency. Low cost and a series of advantages.
Basic aluminium chloride
Sub standard basic aluminum chloride (there are two kinds of raw materials production), composite type chloride, basic aluminum (there are four kinds of raw materials production, mainly for acidic water, water to ferment, decoloring effect good)
Should be used according to the water quality test, choose the good effect of water purification, put a small amount of the best point. The solution should be accompanied with the use, non drinking water should be selected according to the actual situation.
Would the use of a solid, first water dissolved accompany with 10-25% solution and diluted with water to the desired concentration, dissolved in the first water slowly feeding and continue to stir.
3 different manufacturers or different brands of water treatment chemicals should not be mixed, and not with other chemicals stored.
The undiluted and diluted slightly corrosive, but lower than other kinds of inorganic flocculant.
The effective storage products: liquid solid for half a year, two years. Solid products can still be used after tide.
Is this product with reasonable dosage, purified water meets drinking water health standards.