Chemical name: Diisobutylene
Hazardous ingredient content:
2,4,4-Trimethyl-1-pentene≥76%
2,4,4-Trimethyl-2-pentene < 24%
Hazard identification
Dangerous category: Class 3.2 flash point flammable liquid
Pathways: Inhalation, ingestion, skinning absorption
Health hazards: May cause respiratory irritation. High concentrations may cause narcotic effects. May cause eye irritation, swelling and pain. May cause skin irritation.
Environmental hazards: This substance is hazardous to environment and can affect the nearby ecological environment.
Combustion hazards: Flammable with fire and high temperature. Release toxic irritating fumes when burning. Has fire hazard when exposed to heat, flame and strong oxidants. Its vapor can form explosive mixture with air. Violently react with sulfuric acid, oleum and chlorosulfonic acid.
Emergency measures
Skin contact: Remove contaminated clothing, use soap and water to thoroughly wash skin for at least 15 minutes.
Eye contact: Lift eyelid, use flowing water or saline to wash for at least 15 minutes. For medical treatment.
Inhalation: Rapidly move to the place with fresh air, keep the airway open. If breathing is difficult, give oxygen, Give artificial respiration immediately when breathing stopped and seek medical treatment.
Ingestion: Drink enough water, induce vomiting, seek medical treatment.
Fire prevention measures
Hazardous characteristics: Its vapor can form explosive mixture with air and will explode when meet fire and high-heat. React with oxidants.
Hazardous combustion product: Carbon monoxide
Fire fighting methods and extinguishing agents: Firefighters are required to wear gas masks, body wear firefighting suits, put out fire at upwind. Extinguishing media: foam, dry powder, carbon dioxide, sand.
Fire fighting precautions: Never use water
Accidental release measures
Emergency treatment: Isolate leakage polluted area and restrict access. Cut off the fire source. Emergency personnel should wear gas mask (full cover) and protective clothing. Used copper shovel to collect it in a dry, clean and covered container.
Handling and storage
Handling precautions: Closed production process operations, local exhaust ventilation. High concentration vapor contact should wear a filter respirator (half-mask), chemical safety glasses, protective overall on infiltration and anti-chemical gloves. Smoking, eating and drinking are forbidden in workplace. Take a shower and change clothing after work.
Storage pecautions: Store in a cool, ventilated warehouse. Away from fire and heat. Separately stored with oxidants, acids and food chemicals. No large amount or long time storage. Use explosion-proof lighting and ventilation facilities. Prohibit the use of easy to produce sparks mechanical equipments and tools. The storage area should be equipped with suitable leakage container in proper material.
Exposure control/individual protection
Maximum allowable concentration: China (MAC) No developped standard
Monitoring methods: Gas chromatography
Job control: Production process inclosed, full ventilation.
Respiratory protection: Emergency rescue or evacuation, air respirators should be worn.
Eye protection: Exposure to high concentration, wearing chemical protective safety glasses
Body protection: Wear protective overalls on infiltration
Hand protection: Wear general operation protective gloves
Other protection: Smoking, eating and drinking are forbidden in workplace. Take a shower and change clothing after work.
Physical and chemical properties
Appearance: Colorless transparent liquid
Melting point(℃): -101 Relative density(Water = 1): 0.7227
Boiling Point(℃): 102-105 Relative vapor density(Air = 1): No information
Flash point(℃): -6.7 Upper explosive limit%(V/V): 5%
Lower explosion limit%(V/V): 1%
Solubility: Insoluble in water.
Main application: This product is used to produce synthetic rubber tackifier, various surfactants, modifier of phenol resin and epoxy resin, UV absorber, polymerization inhibitor, PVC stabilizer, plasticizer, etc., also used to produce isononyl alcohol and other organic synthetic intermediates.
Stability and reactivity
Stability: Stable
Incompatible materials: Strong oxidizers, strong acids.
Conditions to avoid: Heat, fire
Polymerization hazard: No information
Decomposition products: Carbon monoxide, carbon dioxide
Waste disposal
Properties of waste: Hazardous waste
Waste disposal method: Don't dispose in atmosphere to prevent the formation of explosive mixtures.
Waste precautions: The needless exhaust should through a security burning stove or other combustion devices. The incinerator must be equipped with fire retardant device. No transfer to container without security approval for temporary storage.
Transport information
Dangerous Goods Code: 32017
UN No.: 2050
Packaging sign: Flammable liquid
Packing group: Ⅱ
Packing method: Small open steel drum; ampoule outside ordinary wooden; threaded glass Lid pressure bottles, plastic bottles or metal (cans) outside the ordinary wooden box; threaded bottles, plastic bottles, composite plastic bottles or aluminum outside the ordinary wooden bottle.
Transportation note: During the transportation, the transport vehicle should be equipped with appropriate variety and quantity of fire-fighting equipments and accidental release measure equipments. The vehicle to transport this product must be equipped with fire retardant devices. In the transportation, it must be ensured that the container does not leak, collapse, fall or break. No mixture with oxidants. Avoid sunlight exposure, rain and high temperature. Away from fire and ehat in stopover. The vehicle must be thoroughly cleaned after the transportation. No slide release in railway transportation.