常溫型衛材結構膠801B 用 途：適用于衛生用品、紙尿褲結構固定、多功能無紡布層粘合等。 特 點：初粘性好，色澤淺，剝離強度大，抗老化性能好，對PP、PE等無紡布粘結性能佳。 技術參數：顏 色： 淺黃色透明 　　　　　　粘 度： 1000±300cps @180℃ 　　　　　　　　　　　1300±300 cps @170℃ 　　　　　　　　　　　1900±400 cps @160℃ 　　　　　　　　　　　2800±600 cps @150℃ 軟化點： 73±5℃ 使用指導：建議使用溫度：150℃-170℃。 　　　　　　推薦上膠方式：噴涂或刮涂。 推薦清洗方法：用清潔的礦物油在120℃下清洗，然后用同型號熱熔膠沖洗，沖洗膠溫不要超過170℃。 注意事項：熱熔膠的粘接性能會因粘接物表面的光潔度、涂膠量而產生差異。 　　　　　　在膠機附近工作時，應穿戴好工作服和防護眼鏡。 　　　　　　膠溫應低于180℃以將可燃揮發物的危險降至最低。 　　　　　　在使用熱熔膠時應使空氣暢通，嚴禁一切火源。 包 裝：20公斤紙箱包裝。 儲 存：儲存于陰涼干燥環境中避免陽光直射。儲存溫度應低于35℃并遠離火源和熱源。本產品可以保存2年。 Normal Temperature Construction Adhesive 801B Application 801B is designed for construction adhesive for baby diaper & sanitary napkins, bonding various substrate, such as non-woven fabric lamination. Feature Good initial tack, light color, excellent anti-aging properties, strong peeling strength, excellent adhesion on non-woven fabric such as PP and PE etc. Appearance Yellowish, transparent Viscosity 1000±300cps @180℃ 1300±300cps @170℃ 1900±400cps @160℃ 2800±600cps @150℃ Softening point 73±5℃ Usage guidance 1. Suggested operation temperature: 150℃-170℃. 2. Suggested tooling method: hot-melt spray nozzle or blade coating systems. 3. Suggested cleaning method: Clean the equipment with mineral oil at 120℃. Then flush it with the same type adhesive below 170℃. Precautions 1.The property of glue adhesion will differ from the different surfaces of substrate and thickness of applied adhesive. 2. Material is applied hot-appropriated clothing and eye protection should be used. 3. Please keep the adhesive below 180℃ during operation to keep the lowest danger of flammable volatiles. 4. During adhesive operation, make sure the air flow and any fire is prohibited. Package 1kg/block,each block with a release paper,20kgs in a carton. Storage 2 years in dry and cool environment below 35℃ and far from fire, unexposed to the sunlight.