ChemicalBook CAS DataBase List 1-Methyl-3-pyrrolidinol

1-Methyl-3-pyrrolidinol synthesis

6synthesis methods

Product Name:1-Methyl-3-pyrrolidinol
CAS Number:13220-33-2
Molecular formula:C5H11NO
Molecular Weight:101.15

A 500 mL four-necked flask was charged with a 40 wt% aqueous solution of monomethylamine and cooled to 10 ° C in an ice-water bath. Then, while stirring, 1,4-dichloro-2-butanol was added dropwise, and the temperature was controlled at 15 ° C. Then pour the system into an Autoclave, sealed, evacuated to a pressure of 1.0 ± 0.1MPa, while heated to 120 ℃, the reaction was stirred for about 10h. After the reaction was over and cooled to room temperature, the material was discharged, batch-wise added sodium hydroxide was released, and a large amount of methylamine gas, controlling the temperature below 50 ℃, precipitated a lot of white solid, stirred for 1h; filtration, the filtrate layered, the upper organic phase Ethanol And anhydrous magnesium sulfate, stirring 2 ~ 3h; and then filtered, the filtrate was concentrated in vacuo to give a yellow transparent oily liquid, and then vacuum distillation to give colorless and t1-Methyl-3-pyrrolidinol, Yield 64.8%, purity 99.3%.

2419-74-1 Synthesis

2419-74-1
56 suppliers
$45.00/100mg

74-89-5 Synthesis

74-89-5
0 suppliers
$13.44/25ML

13220-33-2
324 suppliers
$11.00/1g

Yield:13220-33-2 64.8%

Reaction Conditions:

in water at 10 - 120; under 7500.75 Torr; for 10 h;Autoclave;Sealed tube;Temperature;Pressure;

Steps:

5 (Example 5)
This embodiment is 3-hydroxy-1-methyl tetrahydropyrrole preparation method, the specific steps are as follows: A 500 mL four-necked flask was charged with 250 g of a 40 wt% aqueous solution of monomethylamine and cooled to 10 ° C in an ice-water bath. Then, while stirring, 102 g of 1,4-dichloro-2-butanol was added dropwise and the temperature was controlled at 15 ° C The following, about 15min drip finished; Then pour the system into 500mLAutoclave, sealed, evacuated to a pressure of 1.0 ± 0.1MPa, while heated to 120 ± 2 , the reaction was stirred for about 10h, GC control of raw materials disappear. After the reaction was over, cooled to room temperature, the material was discharged, batchwise add 110g of sodium hydroxide, release a large amount of methylamine gas, control the temperature below 50 , precipitated a lot of white solid, stirred for 1h; filtration, the filtrate layered, the upper organic phase Ethanol 100mLAnd anhydrous magnesium sulfate 18g, stirring 2 ~ 3h; and then filtered, the filtrate was concentrated in vacuo to give a yellow transparent oily liquid, and then vacuum distillation to give 46.7g of colorless and transparent 3-hydroxy-1-methyl tetrahydropyrrole , Yield 64.8%, purity 99.3% (HPLC).

References:

Changzhou Sunshine Pharmaceutical Co., Ltd.;Hu Jinping;Hu Guoyi;Zheng Jianlong;Xi Xiaojin CN106631956, 2017, A Location in patent:Paragraph 0022; 0023; 0024; 0025; 0026; 0027

FullText