一二三四区视频,亚洲少妇熟女色,日本久热无码视频网,欧美国产日韩大尺度,亚洲a视频,久久少妇一区二区,日韩999无码视频,刺激久久久久久久,啊啊啊啊不要啊在线

Welcome to chemicalbook!
Chinese English Japanese Germany Korea
010-86108875
Try our best to find the right business for you.
Do not miss inquiry messages Please log in to view all inquiry messages.

Welcome back!

ChemicalBook CAS DataBase List 5-Fluorouracil
51-21-8

5-Fluorouracil synthesis

8synthesis methods
Fluorouracil, 4-fluorouracil (30.1.3.3), is made by condensing the ethyl ester of fluoroacetic acid with ethylformate in the presence of potassium ethoxide, forming hydroxy-methylenfluoroacetic ester (30.3.1), which cyclizes by reacting it with S-methylisothiourea to 2-methylthio-4-hydroxy-5-fluoropyrimidine, which is subsequently hydrolyzed by hydrochloric acid to fluorouracil (30.1.3.3). An alternative method of synthesizing5-fluorouracid is direct fluorination of uracil with fluorine or trifluoromethylhypofluoride.

-

Yield:51-21-8 89.4%

Reaction Conditions:

with fluorine;trifluoroacetic acid at -10; under 2250.23 Torr;Inert atmosphere;Reagent/catalyst;Temperature;Pressure;

Steps:

1

(Figure 1) corning straight channel module 1 (as premix preheat module), corning "heart" microchannel reaction module 6, corning straight channel module 1 (as quenching module) and heat transfer module 8 , And the continuous flow microchannel reaction system is composed according to the reaction flow shown in Fig. The reaction heat transfer medium is made of heat transfer oil. According to the principle of forced heat transfer of microchannel reactor, only two temperature measurement points are set in the inlet and outlet of the reactor. Before the reaction, the microchannel reaction system and the connecting pipeline were treated by dewatering and degreasing respectively. The system and the connecting line were passivated with 5mol% fluorine and nitrogen gas mixture to carry out the airtightness check of 1.0MPa. The uracil solution (i.e., a mixture of uracil and anhydrous hydrofluoric acid, and the concentration of uracil 7%) was continuously added to the microchannel reaction system by the 1-liquid chestnut (Fig. 3). With the gas mass flow meter of Fig. 3, A 20 mol% fluorine-nitrogen mixed gas was continuously added to the microchannel reaction system.Set the heat exchanger temperature 0 ° C, ie the reaction temperature. Set the reaction pressure 0. IMPa. The molar ratio of fluorine gas to uracil was 1.2: 1, and the molar ratio of fluorine gas to uracil was 1.2: 1. The reaction mixture was heated into the "heart-shaped" microchannel reaction module 4 by the microchannel pre-heating module 3 and the fluorine-nitrogen mixed gas was directly introduced into the "heart-shaped" microchannel reaction module 4 through the gas mass flow meter. Heart-shaped "microchannel reaction module 4-9, the fluorine-nitrogen mixture reacts with uracil. The crude reaction product is separated by a gas-liquid separator after quenching the module 10 and then treated by a system and dried to obtain a 5-fluorouracil product. The reaction product was analyzed by liquid chromatography. The results showed that the purity of 5-fluorouracil reached 98.6% and the product yield was 86.7%. The same Corning microchannel reactor was used as in Example 1, and the same connection method and control method were used. This example changes the reaction conditions.Set the heat exchanger temperature -10 ° C, ie the reaction temperature. Set the reaction pressure 0. 3MPa. The reaction material 2 is a uracil solution, i.e., a mixture of uracil and trifluoroacetic acid, with a mass concentration of uracil of 7% and a feed rate of 50 g / min. The raw material 1 is 20 mol% of the fluorine-nitrogen mixed gas, and the feed rate is 4. 2 L / min. The molar ratio of fluorine to uracil is 1. 2: 1. Reaction of raw materials 2 uracil solution through the micro-channel pre-mixed preheating module 3 into the "heart-shaped" micro-channel reaction module 4, fluorine nitrogen mixture through the gas mass flow meter directly into the micro-channel reaction module 4, in the "heart" micro In the channel reaction module 4-9, the fluorine-nitrogen mixture reacts with uracil. The crude reaction product is separated by a gas-liquid separator after quenching the module 10 and then treated by a system and dried to obtain a 5-fluorouracil product. The reaction product was analyzed by liquid chromatography, the purity of 5-fluorouracil reached 99. 2%, the product yield 89. 4%.

References:

CN106432099,2017,A Location in patent:Paragraph 0028-0031; 0057-0061

5-Fluorouracil Related Search:

格尔木市| 岗巴县| 西贡区| 上栗县| 景德镇市| 南康市| 罗田县| 黄浦区| 南通市| 武川县| 石河子市| 贞丰县| 古交市| 绥宁县| 斗六市| 神池县| 宁乡县| 汶川县| 竹北市| 衡水市| 商都县| 长岛县| 利川市| 安阳市| 佛山市| 渑池县| 大新县| 临夏市| 若尔盖县| 合阳县| 腾冲县| 沾益县| 云阳县| 宁阳县| 滁州市| 桐城市| 绍兴县| 永昌县| 湘阴县| 页游| 贵阳市|